Argo AES Series Manual de instrucciones descargar pdf (Pagina 45)

-Modell - 11/12 - Ausgabe 09/11 - 2096161 - BUE-0036-10EN

Pitching the motorhome

Retracting:  Place the socket spanner on the hexagon nut (Fig. 27,1) and rotate until

the steady leg is clear of the ground.

 If the length of the steady leg can be adjusted, remove the splint (Fig. 27,4)

out of the support foot extension (Fig. 27,5).

 Push in the support foot extension (Fig. 27,5) and insert the splint

(Fig. 27,4) in the drilled hole in the support foot extension.

 Rotate the hexagonal nut (Fig. 27,1) until the steady leg has swung

upwards and the guide (Fig. 27,2) has reached the very end of the slot

(Fig. 27,3).

5.5.3 Steady legs (AL-KO) (partially special equipment)

In order to ensure their correct function, clean and grease the interior tubes of

the steady legs regularly.

The length of the steady legs can be adjusted according to the model.

Extending:

 Place the socket spanner on the hexagon nut (Fig. 28,1) and rotate until

the steady leg is in a perpendicular downward position.

 Remove the splint (Fig. 28,4) out of the support foot extension (Fig. 28,5).

 Extend the support foot extension until it has reached the required length.

 Insert the splint in the support foot extension.

 Rotate the hexagonal nut until the steady leg rests completely on the

ground and the vehicle is in a horizontal position.

Retracting:

 Place the socket spanner on the hexagon nut (Fig. 28,1) and rotate until

the steady leg is clear of the ground.

 Remove the splint (Fig. 28,4) out of the support foot extension (Fig. 28,5).

 Push in the support foot extension (Fig. 28,5) and insert the splint

(Fig. 28,4) in the drilled hole in the support foot extension.

 Rotate the hexagonal nut (Fig. 28,1) with the socket spanner until the

steady leg has swung upwards and the guide disc (Fig. 28,3) has com-

pletely retracted into the notch (Fig. 28,2).

Z Before commencing the journey, observe the following: Are all steady legs

and support foot extensions retracted completely and secured with the

splint?

Z Depending on the model, the hexagonal nut has a joint, which can be used

to bring the attached socket spanner into a more convenient position for

turning.

Fig. 28 Steady leg

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 261 262

Sin comentarios

Argo AES Series Manual de instrucciones Pagina 45