Argo AES Series Manual de instrucciones descargar pdf (Pagina 143)

143

-Modell - 11/12 - Ausgabe 09/11 - 2096161 - BUE-0036-10EN

Appliances

Switching on:  Connect the vehicle to the 230 V power supply (see chapter 8).

 Press the rocker switch (Fig. 153,2). The indicator lamp (Fig. 153,1) on the

switch is illuminated.

Switching off:

 Press the rocker switch (Fig. 153,2). The indicator lamp (Fig. 153,1) on the

switch goes off.

After switching off, the floor remains warm for a while, due to residual heat.

If the transformer is overloaded, the overload protection is actuated. The pin

(Fig. 152,2) jumps out.

Switching on overload

protection:

 Press the pin (Fig. 152,2) on the overload protection when the transformer

is cooled.

9.2.7 Independent vehicle heater (special equipment)

The inside and the engine can be heated with the independent vehicle heater.

The heating of the engine can be switched off.

The independent vehicle heater can be turned on and off manually or with a

timer. The time for the heating to start can be exactly preselected from

1 minute to 24 hours. It is possible to program three switching on times, of

which only one can be activated. The maximum permitted operation time is

60 minutes.

Switching on manually:

 Press the button (Fig. 154,7). The heating mode is displayed by the symbol

(Fig. 154,9). The fan will only be switched on when there is a coolant tem-

perature of 30 °C.

Switching off manually:

 Press the button (Fig. 154,7). The symbol (Fig. 154,9) goes off.

Switching on the engine

heating:

 Press the lower part of the switch (Fig. 154,4). Engine is preheated. The

fan is switched on immediately.

Switching off the engine

heating:

 Press the upper part of the switch (Fig. 154,4). Engine stays cold.

X Do not operate the heater in closed spaces. Danger of suffocation!

X Do not operate the heater at petrol stations. Danger of explosion!

Fig. 154 Operating unit for independent

vehicle heater

1 2 ... 138 139 140 141 142 143 144 145 146 147 148 ... 261 262

Sin comentarios

Argo AES Series Manual de instrucciones Pagina 143